Prediction of dry mass glass transition temperature and the spray drying behaviour of a concentrate using a desorption method - Institut Agro Rennes-Angers Accéder directement au contenu
Article Dans Une Revue Journal of Food Engineering Année : 2011

Prediction of dry mass glass transition temperature and the spray drying behaviour of a concentrate using a desorption method

P. Zhu
  • Fonction : Auteur
S. Mejean
  • Fonction : Auteur
E. Blanchard
  • Fonction : Auteur
P. Schuck
  • Fonction : Auteur

Résumé

A predictive tool (SD(2)P (R)) based on a drying by desorption method was recently developed in order to determine the key process parameters values prior to spray drying. However, the SD(2)P (R) software cannot currently take into account the risk of stickiness during the process. In the study reported here, new standardized desorption method was tested and with this new method an equation was proposed to evaluate the dry glass transition temperature (T(g)) of a concentrate according to its total solid content, its viscosity and its average evaporation rate. The concentrate's behaviour during spray drying could then be predicted on the basis of the Tg. Four validation experiments were performed using different infant formula samples

Dates et versions

hal-00729296 , version 1 (07-09-2012)

Identifiants

Citer

P. Zhu, S. Mejean, E. Blanchard, Romain Jeantet, P. Schuck. Prediction of dry mass glass transition temperature and the spray drying behaviour of a concentrate using a desorption method. Journal of Food Engineering, 2011, 105 (3), pp.460-467. ⟨10.1016/j.jfoodeng.2011.03.003⟩. ⟨hal-00729296⟩
88 Consultations
1 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More